ADDRESSABLE FIRE ALARM SYSTEMS
>INTERFACING MODULES
Learn more about our Interfacing Modules under the MX Series Intelligent Fire Alarm Systems!
MX200 ADDRESSABLE INPUT MODULE
Features and Benefits:
- EN54-18 Compliance
- LPCB Pending
- Built-in MCU Processor with Digital Addressing
- Fire or Supervisory Signal Configuration
- Input cable monitored
- Normally-Open configuration LED status indicator
- Loop Powered
- Aesthetically pleasing design
- Surface Mounting with Base for ease of installation
MX201 ADDRESSABLE ZONE MONITOR MODULE
Features and Benefits:
- EN54-18 Compliance
- Built-in MCU Processor with Digital Addressing
- Intelligent Self-diagnosis of open circuit
- Enhanced Interference Resistance by using multilevel wave filtering process
- LED Status Indicator
- Onsite Adjustable Parameter
- Loop and External Power Input
- Aesthetically pleasing design
- Parallel connecting up to 16 Conventional Detectors
- Surface mounting with Base for ease of installation
MX210 ADDRESSABLE SINGLE INPUT / OUTPUT MODULE
Features and Benefits:
- EN54-18:2005 Compliance
- LPCB Approved
- Built-in MCU Processor with Digital Addressing
- 24Vdc/3A Output Relay Contact and Control Module
- Input Fire or Supervisory signal configuration
- LED Status Indicator
- Onsite Adjustable Parameter
- Loop or External Power Input
- Aesthetically pleasing design
- Surface mounting with Base for ease of installation
MX211 ADDRESSABLE SOUNDER CIRCUIT MODULE
Features and Benefits:
- EN54-18 Compliance
- Built-in MCU Processor with Digital Addressing
- Intelligent self-diagnosis of open circuit
- Enhanced capacity of interference resistance by using multilevel wave filtering process
- LED Status Indicator
- Onsite Adjustable Parameter
- Loop or External Power Input
- Aesthetically pleasing design
- Parallel connecting up to 10 fire alarm (≤500mA)
MX220 ADDRESSABLE DUAL INPUT / OUTPUT MODULE
Features and Benefits:
- EN54-18 Compliance
- Built-in MCU Processor with Digital Addressing
- Two circuits 24Vdc/3A Output Relay Contact and Control Module
- Two circuits Input Fire or Supervisory Signal Configuration
- Disable & Enable Input and Output cable monitored
- LED status indicator
- Onsite Adjustable Parameter
- Loop or External Power input
- Aesthetically pleasing design
- Surface Mounting with Base for ease of installation
MX221 MULTICHANNEL I/O MODULE (4-IN / 5-OUT)
Features and Benefits:
- A non-polar bus of two wire
- 4 x Input for Zone Detection (To interface with Conventional Devices), 4 x Auxiliary Contact Output (Voltage-Free), 1 x Supervised Sounder Output
- Filter technology is used to improve the anti-interference capabilities of the module
- Supplied as a PCB for convenience to be mounted inside any suitable equipment at site (PVC Housing may be ordered separately, if required)
MX230 ADDRESSABLE ISOLATOR MODULE
Features and Benefits:
- EN54-17:2005 Compliance
- LPCB Approved
- In the event of a short circuit, isolates faulty parts of the loop.
- Automatically Reset, once the fault is cleared
- Monitor up to 70 devices
- LED Status Indicator
- Loop Powered
- Aesthetically pleasing design
- Surface mounting with Base for ease of installation